Skip to content
image of product
arrow_forward_ios
arrow_forward_ios

Fascia Extender Offset

The Drexel Metals Fascia Extender w/Offset is a two-part assembly that includes a continuous cleat and a decorative fascia cover for single-ply commercial roof systems. It extends the face of the fascia for longer stretch that helps meet design without sacrificing tested sizes.

Ideal Application
  • Flat Roof
  • Roof Edge
Product Data Sheet
east
Color Chart
east
Profile Options

ADDITIONAL GAUGES – .040, .050 and .063 aluminum and 22 gauge Galvalume are available upon request

Technical

Engineering and shop drawings, as well as long-form specifications and CAD details, are available from Drexel Metals. Product samples, detail sheets, color chips and color charts are also available for submittal packages. For personal assistance with questions or for full submittals, contact Drexel Metals or your local independent sales representative.

Installation

For complete installation instructions, please refer to Drexel Metals Architectural specifications and details.

Testing

Drexel Metals Fascia Extender is tested per ANSI/SPRI Test Method RE-2 for fascia. The Fascia Extender shall be certified by Drexel Metals to design pressures as indicated in current edition of SPRI’s Wind Resistance Standard for Edge Systems used with Low Slope Roofing System. This product meets International Building Code minimum requirement.

Contact Us Graphic

Get In Touch

Contact Us
east
Map with Locations Pinned

Where to Buy

Find a Drexel Metals Representative near you!